[x] ปิดหน้าต่างนี้
Powered by ATOMYMAXSITE 2.6
ยินดีต้อนรับคุณ บุคคลทั่วไป  
English Chinese (Simplified) Chinese (Traditional) French German Italian Japanese Korean Portuguese Russian Spanish Vietnamese Thai     
เมนูหลัก
เว็บไซต์แผนกวิชา
อาชีวศึกษา จังหวัดเพชรบูรณ์

ภาพกิจกรรม
สถิติผู้เยี่ยมชม


  

   เว็บบอร์ด >> สอบถาม พูดคุยเกี่ยวกับการเรียนการสอน >>
Beating The Heat: Ac Versus Swamp Cooler  VIEW : 154    
โดย Jayme

UID : ไม่มีข้อมูล
โพสแล้ว : 3
ตอบแล้ว : 12
เพศ :
ระดับ : 3
Exp : 18%
เข้าระบบ :
ออฟไลน์ :
IP : 45.192.150.xxx

 
เมื่อ : เสาร์์ ที่ 6 เดือน สิงหาคม พ.ศ.2565 เวลา 04:04:22    ปักหมุดและแบ่งปัน

In the scorching summer days, the desired temperature can often just be brought about through use of air conditioning products. Air conditioners and swamp coolers (also referred to as evaporative coolers) are both designed to control the heat range in a space, nevertheless the methods used to achieve the preferred result are different. Learning more about cooling devices can help you determine the right option for the needs of yours.
Adding vs. Reducing Humidity
Air conditioners which are widely-used in just a home setting are usually created to work as dehumidifiers which means that they remove the moisture out of the atmosphere. On the other hand, evaporative coolers actually produce a cooling effect by incorporating humidity on the air. Unsurprisingly, the most typical locations which evaporative coolers used are regions which have dry and hot climate.

Air flow Conditioners
In the event it relates to the processing that occurs in an Arctos Portable AC unit, the method being used is evaporation and condensation. The air conditioner device has coils which are made inside it. As hot air passes with these coils, the refrigerant that is within the coils transforms from a liquid state to some gaseous state while at the same time taking in the high temperature from the hot air. After this process is done, the refrigerant transforms directlyto its original fluid condition and also the exact same procedure takes place all over again.

Swamp coolers
Swamp coolers are fashioned to draw air flow from the exterior and then process it by way of a cooler thereby effectively decreasing its temperature. The cooler is built using wet pads and as the warm water in the pads evaporates, it makes a cooling effect on the atmosphere. The air is pumped into the structure with an air circulation system. Even though the level of temperature of degrees might vary, the most common result is temperature lowering by approximately twenty degrees F. When this procedure is repeated, it now and again creates an environment in addition discovered in a swampy area and therefore the identity of the cooler.
Swamp Coolers vs. Air Conditioners